Teltonika DAP145 Industrial Wi-Fi 4 Access Point with RS485, AP/STA/mesh, 2x LAN 10/100, DIN rail, PoE Mode B, 9-30 VDC

Teltonika DAP145 (DAP145000000), industrial Wi-Fi 4 access point with RS485 for DIN rail mounting

The Teltonika DAP145 combines Wi-Fi 4 and RS485 in a slim DIN rail device. It bridges serial RS-485 devices to IP via Serial-over-IP or Modbus and extends Wi-Fi cells via mesh and fast roaming. Ideal for industrial automation, energy, smart city and retail.

Wi-Fi 4 with mesh and fast roaming

802.11b/g/n as access point or station with WPA3, EAP-TLS, MAC filter, SSID stealth and up to 50 concurrent clients. Wireless mesh (802.11s), fast roaming (802.11r), BSS transition management (802.11v) and radio resource measurement (802.11k) enable mobile industrial assets without disconnection.

RS485 and Serial-over-IP

RS485 interface as 6-pin terminal block (D+, D-, R+, R- for 2 or 4 wire operation). Native Modbus RTU/TCP, Serial-over-IP and Data to Server bring serial industrial devices to the cloud and SCADA.

Ethernet, power and PoE

Two Ethernet ports 10/100 Mbps, power supply via 3-position terminal block 9 to 30 VDC or passive PoE Mode B over LAN1 (not 802.3af/at/bt compatible). Reverse polarity and surge protection included.

Security and VPN

Firewall, VLAN, 802.1x, certificate manager. OpenVPN, IPsec, WireGuard, ZeroTier, Tailscale, GRE, L2TP, PPTP for secure tunnels to the control center.

Management

Remote Management System (RMS), FOTA, TR-069, SNMP, MQTT, web UI. RutOS based on OpenWrt with comprehensive configuration options.

Ruggedness and mounting

Slim form factor with integrated DIN rail mounting, 113.1 x 25 x 68.6 mm, 149 g. Operating temperature -40 to +75 deg C.

Technical highlights

- Wi-Fi 4 AP/STA with mesh and fast roaming

- RS485 6-pin terminal (2 or 4 wire) with Modbus RTU

- 2x Ethernet 10/100, passive PoE Mode B

- 9-30 VDC, 3-position terminal block, surge protection

- DIN rail, -40 to +75 deg C

- RutOS, RMS, OpenVPN, WireGuard, MQTT, SNMP